What To Know
- The recommended oil capacity for a 2018 Ford F-150 with the 2.
- If you frequently drive in extreme temperatures, tow heavy loads, or engage in stop-and-go traffic, you may need to change your oil more frequently.
- Let the engine run for a few minutes to allow the oil to circulate.
The 2018 Ford F-150 with the 2.7L EcoBoost engine is a popular choice for its power and fuel efficiency. But, like any vehicle, it requires regular maintenance, including oil changes. One common question that pops up is: how much oil does a 2018 Ford F-150 2.7 take? This guide will provide a comprehensive answer to that question, along with essential information about oil types, change intervals, and more.
Understanding Oil Capacity and Its Importance
The oil capacity of your 2018 Ford F-150 2.7L engine is crucial for optimal performance and longevity. It’s not just about the amount of oil you pour in; it’s about ensuring the right quantity for proper lubrication and cooling.
How Much Oil Does a 2018 Ford F-150 2.7L Engine Take?
The recommended oil capacity for a 2018 Ford F-150 with the 2.7L EcoBoost engine is 6.5 quarts. This figure includes the oil filter, so you should add 6.5 quarts when performing an oil change.
Why is Knowing Oil Capacity Important?
- Engine Health: Too little oil can lead to excessive wear and tear on engine components, resulting in costly repairs. Too much oil can cause excessive pressure, potentially damaging seals and gaskets.
- Performance: The correct oil level ensures optimal lubrication, reducing friction and improving engine performance.
- Fuel Efficiency: Proper oil levels help maintain optimal engine efficiency, leading to better fuel economy.
What Type of Oil Should I Use?
Ford recommends using synthetic blend motor oil in the 2018 F-150 2.7L engine. Synthetic blend oil offers a balance of performance and affordability compared to fully synthetic oils.
Here are some key points to consider:
- Viscosity: Ford specifies a viscosity of 5W-30 for the 2018 F-150 2.7L engine. This viscosity provides optimal lubrication across a wide range of temperatures.
- API Certification: Ensure the oil you choose meets the API (American Petroleum Institute) certification for your specific engine. The certification label will indicate the oil’s quality and suitability for your vehicle.
How Often Should I Change My Oil?
Ford recommends an oil change interval of 5,000 miles or 6 months, whichever comes first, for the 2018 F-150 2.7L engine. However, this interval can vary depending on your driving conditions.
- Severe Driving Conditions: If you frequently drive in extreme temperatures, tow heavy loads, or engage in stop-and-go traffic, you may need to change your oil more frequently.
- Oil Quality: The quality of the oil you use also influences the change interval. Synthetic blend oils generally last longer than conventional oils.
Checking Your Oil Level: A Simple Guide
1. Park on Level Ground: Ensure your truck is parked on a level surface.
2. Warm Up the Engine: Let the engine run for a few minutes to allow the oil to circulate.
3. Locate the Dipstick: The dipstick is usually located on the driver’s side of the engine, near the front.
4. Pull Out and Wipe: Pull the dipstick out and wipe it clean with a clean cloth.
5. Reinsert and Check: Reinsert the dipstick fully and then pull it out again.
6. Read the Level: The oil level should be between the “Full” and “Add” marks on the dipstick.
Final Thoughts: Keeping Your 2018 F-150 2.7L Running Smooth
Knowing how much oil your 2018 Ford F-150 2.7L engine needs and understanding the importance of regular oil changes is essential for maintaining its performance and longevity. By adhering to the recommended oil type, capacity, and change intervals, you can ensure your truck runs smoothly for years to come.
Quick Answers to Your FAQs
Q: Can I use a different viscosity oil than what Ford recommends?
A: It’s generally not recommended to deviate from the manufacturer’s recommended viscosity. Using a different viscosity oil could lead to improper lubrication and potential engine damage.
Q: What happens if I overfill the oil?
A: Overfilling the oil can create excessive pressure within the engine, potentially damaging seals and gaskets.
Q: Can I use conventional oil instead of synthetic blend?
A: While you can use conventional oil, it’s not recommended as it doesn’t offer the same level of protection and performance as synthetic blend oil.
Q: What are the signs of low oil levels?
A: Low oil levels can lead to a variety of symptoms including:
- Engine noise: A knocking or ticking sound.
- Reduced performance: Loss of power or difficulty starting.
- Blue smoke: Smoke coming from the exhaust.
- Check engine light: The warning light may illuminate.
Q: How much does an oil change cost for a 2018 Ford F-150 2.7L?
A: The cost of an oil change can vary depending on the location, shop, and type of oil used. However, you can expect to pay anywhere from $30 to $80 for a basic oil change.
